Company Information Literature Company News

Small package capable of accurate 0 to 100% RH detection. Compact with low profile(2.5×2.2×1.0mm). Capable of measurement at 100% RH (dew point). No need for temperature compensation (thermistor not required)

Mid-mount solution with height of 1.35mm above the PCB. Low profile with height of 1.35mm above the PCB (with 0.8mm-thick PCBs). Realizes high solder strength for impact resistance. Excellent operating feel achieved with stem designed to directly press down the dome spring. Dust protection for a reliable contac

Main power ON/OFF, Mode selection, Start can be completed with one switch. Two shafts are combined. Center shaft : Push switch (Unlatching), Outside shaft : Encoder, Zero standby power consumption is available by auto-off function with relay movement due to built-in both AC and DC contact in the push switch, Both pulse and absolute output are available for the installed encoder

Highly efficient power inductor with a proprietary new magnetic material for large current. Liqualloy™ low core loss material for high-efficiency power supplies. For large current, Excellent low heat generation characteristics and high reliability due to low direct current resistance (DCR), Metal composite structure allows a compact size

Industry's smallest connector achieves space efficiency and high operability. Compatible with microSIM cards (8-pin), Normally closed switch contributes to lower power consumption, Industry's smallest push-push type connector...

IP68 water resistant, enabling submerged operation, Compatible with broad rating range from weak to medium currents. (10mA to 4.5A), Snap action contact mechanism provides clear-cut clicking feel., Terminal tab (#187) pitch is 9.2mm, improving insulation.

Coupling efficiency improved approx. 7% with 1 x 1 mm square in industry smallest size maintained. Expanded aspherical lens aperturture contributes around 7% performance improvement in terms of coupling efficiency, this is based on high refractive index glass and original nano machining process, Dielectric multilayered AR (Anti Reflection) coating will be cover from O-Band to L-Band which is popular wave length for optical communication, and optional for...

...

Smaller size and 100 million cycles durability achieved. Compact and low-profile size of 11 x 13.7 x 3.2mm (WxDxH). High durability: 100 million dither cycles, 10 million full cycles. Micro-linearity: within ±0.1%

Industry's highest azimuth accuracy, and lowest-ever current consumption. Output noise reduced approx. 30% compared to the earlier model by optimizing the high-precision magnetic element, enabling higher azimuth accuracy and reduced calibration time. ±1.2mT high-precision measurement range improves set layout flexibility within magnetic field environments. Proprietary software enables combining of electronic compass functions and 3-axis angular velocity...

4.4mm low-profile, 2-phase incremental encoder for easy setting of signal conditions. 2-phase incremental type encoder for general use. Low-profile design with a 4.5mm body height. Devices such as switches and LEDs can be mounted into its center therefore contributing to the final set's flexibility of design. Good operation feeling and less shaft wobble...

Compact type with body height of 1.2mm enables single-side recoil travel 2mm. Compact size of 7.6 x 2.6 x 1.2mm (WxDxH).Achieved long operating life by limitation in single-side recoil operation. Left-side recoil type and right-side recoil type are also available. Available for reflow soldering...

Support media; SD / MMC / MS Duo / MS PRO-HG Duo. Our unique cam structure contributes to mis-insertion for MS Duo. Compact and low-profile size of 29.8x31.4x4.4mm(WxDxH). High reliable write protect switch achieved by sliding contact. Standard and reverse mount type also available...