59025 Firecracker

A small cylindrical reed sensor 25.4mm x 6.22mm (1.00" x 0.245") with a choice of normally open, normally closed or change over contacts.

59045 Miniature PCB Mount

A miniature PCB mounting reed sensor 17.78mm x 4.32mm x 3.30mm(0.700" x 0.170" x 0.130mm) with a normally open contact.

59060 Stainless Steel M8 Threaded Barrel

A small stainless steel barrel sensor with an M8 x 1.25mm pitch thread, 36mm (1.420") long with a choice of normally open, normally open high voltage, normally closed or change over contacts.

59070 M8 Plastic Threaded Barrel

A small plastic barrel sensor with an M8 x 1.25mm pitch thread, 38.1mm (1.500") long with a choice of normally open, normally open high voltage, normally closed or change over contacts.

59085 Vane Sensor

A reed sensor with integral actuator magnet. Actuation occurs when a suitable vane passes through the slot between the magnet and switch. Normally open, normally closed, high voltage normally closed or changeover contacts.

59105 Terminal Flange

A flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm (1.125" x 0.750" x 0.259") with an integral 2 pin connector. Choice of normally open, normally open high voltage or normally closed contacts.

59135 High Temperature Flange Mount

A high temperature flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm (1.125" x 0.750" x 0.259") with a choice of normally open, normally open high voltage, normally closed or changeover contacts.

59141 Miniature Flange Mount

A miniature flange mounting reed sensor occupying only 3.22mm² (0.500"²) board space with a choice of normally open, normally open high voltage, normally closed or changeover contacts.

59150 Flange Mount

A flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm (1.125" x 0.750" x 0.259") with a choice of normally open, normally open high voltage, normally closed or changeover contacts.

59165 Moulded MDSR-7 Switch

A miniature overmoulded reed sensor 16.00mm x 2.41mm x 2.41mm(0.630" x 0.095" x 0.095mm) with either straight or Gull Wing leads. Normally open contact.

59210 Lever Arm

A small lever arm reed sensor in a clip mounting frame with low operating force and an integral 2 pin connector. Normally closed contacts.

59250 Seating Occupancy

A magnetically operated push button sensor with simple push fit clip mounting. Normally open contacts actuate when the plunger is depressed.

59630 Float Sensor

A small sensor with integral float actuator and an M8 x 1.25mm pitch thread with a choice of normally open, normally open high voltage, normally closed or change over contacts.

55075 Stainless Steel M12 Geartooth

A robust stainless steel hall effect barrel sensor with an M12 x 1mm pitch thread, 46mm (1.810") long primarily for geartooth sensing. Protected against severe and automotive environments.

55100 Miniature Flange Mount

A miniature flange mounting hall effect sensor 25.5mm (1.004") x 11.00m (0.433") and only 3.00mm (0.118") high with a choice of digital, latching or programmable analogue outputs.

55140 Flange Mount

A small flange mounting hall effect sensor occupying only 3.22mm² (0.500"²) board space with a choice of digital, latching or programmable analogue outputs.

DRR-129 Standard

A standard, normally open switch with a 50.80mm long x 5.25mm diameter (2.000" x .207") glass envelope, capable of high voltage and power switching up to 400Vdc at 100W.

DRT-DTH Standard Changeover

A standard changeover switch with a 39.67mm long x 5.33mm diameter (1.562" x 0.210") glass envelope, with tungsten contacts capable of high voltage and power switching up to 500Vdc at 50W.

HA15-2 Sub-miniature HV

A sub-miniature, normally open switch with a 15.24mm long x 2.28mm diameter (0.600" x 0.090") glass envelope, capable of high voltage switching of 265Vac at 10VA.

MDCG-4 Sub-miniature

A sub-miniature, normally open switch with a 15.24mm long x 2.28mm diameter (0.600" x 0.090") glass envelope, capable of switching 200Vdc at 10W.

MDRR-DT Miniature Changeover

A miniature changeover switch with a 14.73mm long x 2.54mm diameter (0.580" x 0.100") glass envelope, capable of switching 175Vdc at 5W. Sensitivity range 15-30 AT.

MDSM-4 Sub-miniature Surface Mount

A sub-miniature, surface mounting, normally open switch with a 15.24mm long x 2.28mm diameter (0.600" x 0.090") glass envelope.UL recognised and capable of switching 200Vdc at 10W.

MDSR-10 Sub-miniature

A sub-miniature, normally open switch with a 10.16mm long x 1.80mm diameter (0.400" x 0.071") glass envelope, capable of switching 200Vdc at 10W.

MLRR-3 Miniature CD

A miniature, normally open switch with a 15.24mm long x 2.54mm diameter (0.600" x 1.000") glass envelope, capable of switching 200Vdc at 20W with close differential (CD) characteristics.

MLSM-3 Miniature CD Surface Mount

A miniature, surface mounting, normally open switch with a 15.24mm long x 2.54mm diameter (0.600" x 1.000") glass envelope.UL recognised and capable of switching 200Vdc at 20W with close differential (CD) characteristics.

MRPR-3 Miniature Power

A miniature, normally open switch with a 19.69mm long x 2.84mm diameter (0.770" x .112") glass envelope, capable of switching up to 200Vdc at 50W.

HE3300 SIL

Miniature reed relay in an SIL package with a choice of normally open, normally open high voltage or changeover contacts capable of switching up to 300Vdc at 10W.

HE700 Miniature DIL

Miniature reed relay in a DIL package with a choice of normally open, normally open high voltage, normally closed or changeover contacts capable of switching up to 300Vdc at 10W.