| Series | File Size | Pages | Type |
| Complete Section | 1.13 MB | 8-18 |  |
| Creepage and clearance distances | 26 KB | 8 | |
| Overvoltage category | 26 KB | 8 | |
| Degrees of pollution | 26 KB | 8 | |
| Usage temperature | 26 KB | 8 | |
| Circuits directly connected to the low voltage mains | 27 KB | 9 | |
| Rated impulse voltage for equipment | 27 KB | 9 | |
| Minimum clearances for insulation coordination | 27 KB | 10 | |
| Single phase three- or two-wire a.c. or d.c. systems | 26 KB | 11 | |
| Three-phase four- or three-wire a.c. systems | 26 KB | 12 | |
| Minimum creepage distances for equipment subject to long-term stresses | 27 KB | 13 | |
| Current carrying capacity | 27 KB | 14 | |
| Rated current | 27 KB | 14 | |
| Rated voltage | 27 KB | 14 | |
| Wire cross section | 27 KB | 14 | |
| Structure and dimensions of conductors | 30 KB | 15 | |
| Protection against manual contact | 30 KB | 15 | |
| Insulation moulds | 30 KB | 15 | |
| Approvals | 30 KB | 16 | |
| Explanations to the Technical Data | 30 KB | 16 | |
| European guidelines and CE mark | 30 KB | 16 | |
| European agencies for testing and approvals | 91 KB | 17 | |
| THR and SMT - what is it? | 27 KB | 18 | |
| Series | File Size | Pages | Type |
| Complete Section | 2.30MB | 21-56 | |
| SpringCon Information | 294 KB | 21-26 | |
| Spring clamp terminal blocks, solderable | |||
| Centerline 2.5 mm / 0.098 inches | |||
| Wire entry horizontal | 81 KB | 27 | |
| Wire entry 45° | 56 KB | 28 | |
| Centerline 2.54 mm / 0.100 inches | |||
| Wire entry horizontal | 56 KB | 29 | |
| Wire entry vertical | 55 KB | 30 | |
| Centerline 3.81 mm / 0.150 inches | |||
| Wire entry horizontal | 113 KB | 31 | |
| Centerline 5.0 mm / 0.197 inches | |||
| Wire entry horizontal | 211 KB | 32-34 | |
| Wire entry 45° or 60° | 215 KB | 35-36 | |
| Wire entry vertical | 233 KB | 37-38 | |
| Centerline 5.08 mm / 0.200 inches | |||
| Wire entry 60° | 195 KB | 39 | |
| Centerline 7.5 mm / 0.295 inches | |||
| Wire entry horizontal | 119 KB | 40-41 | |
| Wire entry 45° or 60° | 290 KB | 42-43 | |
| Centerline 7.62 mm / 0.300 inches | |||
| Wire entry 60° | 194 KB | 44 | |
| Wire entry vertical | 90 KB | 45 | |
| Single terminal blocks solderable | |||
| Wire entry right angled to PCB | 79 KB | 55 | |
| Spring clamp terminal blocks, pluggable | |||
| Centerline 2.5 mm / 0.098 inches | |||
| Wire entry parallel to plug direction | 56 KB | 47 | |
| Centerline 3.5 mm / 0.138 inches | |||
| Wire entry parallel to plug direction | 119 KB | 48 | |
| Centerline 3.81 mm / 0.150 inches | |||
| Wire entry parallel to plug direction | 261 KB | 49-50 | |
| Centerline 5.0 mm / 0.197 inches | |||
| Wire entry parallel to printed circuit board | 59 KB | 51 | |
| Wire entry parallel to plug direction | 58 KB | 52 | |
| Centerline 5.08 mm / 0.200 inches | |||
| Wire entry parallel to plug direction | 90 KB | 53 | |
| Centerline 10.0 mm / 0.394 inches | |||
| Wire entry parallel to plug direction | 91 KB | 54 | |
| Series | File Size | Pages | Type |
| Complete Section | 2.37 MB | 57-108 | |
| RIACON Information | 266 KB | 57-62 | |
| Screw type terminal blocks solderable | |||
| Centerline 3.5 mm / 0.138 inches | |||
| Wire entry horizontal | 75 KB | 63 | |
| Wire entry 45° or 55° | 69 KB | 64 | |
| Wire entry vertical | 100 KB | 65 | |
| Centerline 3.81 mm / 0.150 inches | |||
| Wire entry horizontal | 85 KB | 66 | |
| Centerline 5.0 mm / 0.197 inches | |||
| Wire entry horizontal | 509 KB | 67-75 | |
| Wire entry 45° or 35° | 72 KB | 76 | |
| Wire entry vertical | 64 KB | 77 | |
| Centerline 5.08 mm / 0.200 inches | |||
| Wire entry horizontal | 236 KB | 78-81 | |
| Wire entry vertical | 83 KB | 82 | |
| Centerline 6.35 mm / 0.250 inches | |||
| Wire entry horizontal | 56 KB | 83 | |
| Centerline 7.5 mm / 0.295 inches | |||
| Wire entry horizontal | 70 KB | 84 | |
| Centerline 9.52 mm / 0.375 inches | |||
| Wire entry horizontal | 58 KB | 85 | |
| Single terminal blocks solderable | |||
| without housing | 117 KB | 105-107 | |
| with housing | 58 KB | 108 | |
| Screw type terminal blocks solderable | |||
| Centerline 3.5 mm / 0.138 inches | |||
| Wire entry parallel to PCB | 54 KB | 87 | |
| Wire entry parallel to plug direction | 74 KB | 88 | |
| Centerline 3.81 mm / 0.150 inches | |||
| Wire entry parallel to plug direction | 72 KB | 89 | |
| Wire entry perpendicular to plug direction | 186 KB | 90 | |
| Centerline 5.0 mm / 0.197 inches | |||
| Wire entry parallel to PCB | 277 KB | 91-94 | |
| Wire entry parallel to plug direction | 207 KB | 95-97 | |
| Wire entry perpendicular to plug direction | 78 KB | 98 | |
| Centerline 5.08 mm / 0.200 inches | |||
| Wire entry parallel to PCB | 57 KB | 99 | |
| Wire entry parallel to plug direction | 183 KB | 100-101 | |
| Wire entry perpendicular to plug direction | 186 KB | 102-103 | |
| Centerline 7.62 mm / 0.300 inches | |||
| Wire entry parallel to plug direction | 53 KB | 104 | |
| Series | File Size | Pages | Type |
| Complete Section | 2.25 MB | 109-150 | |
| PLUGCON Information | 162 KB | 109-112 | |
| Headers for product series SPRINGCON and RIACON | |||
| Centerline 2.5 mm / 0.098 inches | |||
| Header with closed ends for vertical mounting | 57 KB | 113 | |
| Header with closed ends for horizontal mounting | 53 KB | 114 | |
| Centerline 3.5 mm / 0.138 inches | |||
| Header for vertical mounting | 99 KB | 115 | |
| Header with closed ends for vertical mounting | 210 KB | 116-117 | |
| Header with closed ends for horizontal mounting | 216 KB | 118-119 | |
| Centerline 3.81 mm / 0.150 inches | |||
| Header with closed ends for vertical mounting | 221 KB | 120-121 | |
| Header with closed ends for horizontal mounting | 224 KB | 122-123 | |
| Centerline 5.0 mm / 0.197 inches | |||
| Header for vertical mounting | 295 KB | 124-126 | |
| Shrouded header for vertical mounting | 63 KB | 127 | |
| Header with open ends for vertical mounting | 66 KB | 128 | |
| Header with closed ends for vertical mounting | 275 KB | 129-132 | |
| Header for horizontal mounting | 50 KB | 133 | |
| Header with open ends for horizontal mounting | 69 KB | 134 | |
| Header with closed ends for horizontal mounting | 243 KB | 135-137 | |
| Centerline 5.08 mm / 0.200 inches | |||
| Header for vertical mounting | 63 KB | 138 | |
| Header with open ends for vertical mounting | 54 KB | 139 | |
| Header with closed ends for vertical mounting | 235 KB | 140-142 | |
| Header with open ends for horizontal mounting | 55 KB | 143 | |
| Header with closed ends for horizontal mounting | 239 KB | 144-146 | |
| Centerline 7.62 mm / 0.300 inches | |||
| Header with open ends for vertical mounting | 51 KB | 147 | |
| Header with closed ends for vertical mounting | 51 KB | 148 | |
| Header with open ends for horizontal mounting | 51 KB | 149 | |
| Header with closed ends for horizontal mounting | 52 KB | 150 | |
| Series | File Size | Pages | Type |
| Complete Section | 289 KB | 151-158 | |
| IDCON Information | 225 KB | 151-156 | |
| IDC terminal blocks, solderable | |||
| Centerline 3.5 mm / 0.138 inches | |||
| Wire entry horizontal | 115 KB | 157 | |
| Series | File Size | Pages | Type |
| Complete Section | 358 KB | 159-170 | |
| TUBECON Information | 103 KB | 159-162 | |
| Tubular screw terminal blocks | |||
| centerline 8 mm / 0.315 inches | 174 KB | 163-165 | |
| centerline 10 mm / 0.394 inches | 172 KB | 166-168 | |
| centerline 12 mm / 0.472 inches | 64 KB | 169 | |
| centerline 14 mm / 0.551 inches | 65 KB | 170 | |
| Series | File Size | Pages | Type |
| Complete Section | 377 KB | 171-182 | |
| Accessories Information | 70 KB | 171-172 | |
| Mounting flanges | 160 KB | 173-175 | |
| Coding pins | 305 KB | 176-180 | |
| More accessories | 68 KB | 181-182 | |
| Series | File Size | Pages | Type |
| Complete Section | 1.98 MB | 183-188 | |
| Series | File Size | Pages | Type |
| Complete Section | 243 KB | 191-204 | |
| Type List and Usage Guide Contents | 27 KB | 191 | |
| Types and Certification Index | 171 KB | 192-193 | |
| Headers mating with terminal blocks | 138 KB | 194-199 | |
| Accessories for terminal blocks | 51 KB | 200-201 | |
| Accessories for headers | 30 KB | 202 | |
| Screw materials and surfaces | 27 KB | 203 | |
| Series | File Size | Pages | Type |
| Complete Section | 304 KB | 205-209 | |
