| |
 |
| AZ762F Series 20 A SPST Miniature Power Relay with Quick Connects |

 |
Aliso Viejo, California - American Zettler Inc. has just announced a new extra high temperature version of their AZ762 relay. The new relay, designated AZ762F, is rated by UL for 20 A, 277 VAC, 100k cycles. The AZ762F SPST relay features quick connects for the load connection so there is no need for heavy copper traces on the PCB. The Quick Connects are available either vertically or horizontally oriented. With isolation of 10 mm and a dielectric strength of 5000 Vrms, this relay is perfect for many HVAC and white goods applications where high ambient temperatures (up to 125°C) might pose a problem for other relays. The AZ762F is RoHS compliant and has full UL / CUR/ VDE approvals.
|
| Relay Description |
20 A SPST Miniature Power Relay with Quick-Connects |
| Features/Benefits |
Dielectric strength 5000 Vrms, 10kV surge, 20 Amp switching, Class F (155°C) standard, Isolation spacing greater then 10mm, UL, CUR, VDE |
| Relay Applications |
HVAC, lamp and motor controls for office equipment, space heater controls, microwave oven (magnetron) controls, range controls |
 |
| CHERRY’S NEW DZ SERIES SWITCHES OFFER POSITIVE BREAK ACTION |


|
PLEASANT PRAIRIE, WI – Cherry Electrical Products’ new DZ Series sub-miniature switch features a Positive Break Action contact system specifically designed for applications with inductive loads, including automatic sun blinds, drives for adjustable beds and armchairs used in medical facilities, drives for automatic doors and gates, and limit switches for industrial automation and material handling equipment.
The DZ Series switch features a notched actuator which is used to operate the internal positive break lever when the contact is lightly welded and the operating force is insufficient to open the contact. The construction of DZ enables it to switch high inductive loads of 3 amps at 250VAC for 50,000 operations on the NC contact. The mechanical life of the switch is specified to 1,000,000 operations. It is complaint to EN 60335-1 for resistance to heat and fire and is approved to ENEC and UL. DZ Series switches also feature cadmium-free contact material according to the RohS directive for European and U.S. markets.
The DZ Series switch has a contact resistance of less than 100mohm between 100mA/10VDC. It has an operating force of 220 cN (max), with a reset force of 60cN (min.). Its temperature rating is -20°C to 85°C.
|
 |
|
|