Warning: preg_match(): Unknown modifier '2' in /usr/local/www-relayspec/classes/browser.php on line 89
Warning: preg_match(): Unknown modifier '2' in /usr/local/www-relayspec/classes/browser.php on line 89
Overview
Specification
Drawings
DC output SPST-NO solid state relays use MOSFET output for high switching capabilities in a DIN Rail (TS-35) mount air-cooled package.
|
| Features |
| DIN Rail Mount (TS 35)
|
| MOSFET Output
|
| Extra Low On State Resistance
|
| Input Status LED
|
| |
|
|
| Main
Category |
Relays |
| Sub
Category |
Solid State Relay |
| Control Voltage |
15-32 VDC |
| Load Current |
05 Amps |
| Load Voltage |
12-280 VAC |
| Output Configuration |
1A NO |
| Mounting |
DIN Rail Mount 12.5mm width |
| Output |
SCR |
| Mounting Type |
Din Rail Mount |
| Input Status LED |
yes |
| Contact Configuration |
SPST-NO |
| Nominal Voltage |
24 VDC |
| Operating Voltage (47-63 Hz) [Vrms] |
12-280 |
| Load Current Range [Arms] |
.06-5 |
| Transient Overvoltage [Vpk] |
600 |
| Max. Surge Current, (16.6ms) [Apk] |
250 |
| Max. On-State Voltage Drop @ Rated Current [Vpk] |
1.4 |
| Maximum I ^2 t for Fusing, (8.3 msec.) [A^2sec] |
260 |
| Max. Off-State Leakage Current @ Rated Voltage [mArms] |
0.1 |
| Min. Off-State dv/dt @ Max. Rated Voltage [V/?sec] |
500 |
| Max. Turn-On Time |
1/2 Cycle (DC Control), 10.0 msec (AC Control) |
| Max. Turn-Off Time |
1/2 Cycle (DC Control), 40.0 msec (AC Control) |
| Power Factor (Min.) with Max. Load |
0.5 |
| Control Voltage Range |
15-32 Vdc |
| Max. Turn-On Voltage |
15.0 Vdc |
| Min. Turn-Off Voltage |
1.0 Vdc |
| Nominal Input Impedance |
1.0k Ohm |
| Typical Input Current @ Nominal Voltage |
8 mA |
| Dielectric Strength 50/60Hz Input/Output/Base |
2500 Vrms |
| Insulation Resistance (Min.) @ 500 Vdc |
10^9 Ohm |
| Max. Capacitance Input/Output |
10 pF |
| Ambient Operating Temperature Range |
-30 to 80°C |
| Ambient Storage Temperature Range |
-30 to 125°C |
| Weight: (typical) |
30 g |
| Encapsulation |
Thermally Conductive Epoxy |
|
|
|
|
|
