Description

 

The 2310SA is an initiate switch controlled single-shot timer controlling a SPDT set of relay contacts. The 2310SA is available in a range of both AC and DC models. With operating voltage applied, the timer is in a stand-by mode. Momentary closure of the initiate switch causes the output contacts to energize for a preset timing period, and then de-energize. Re-closure of the initiate switch during a timing cycle will not effect the timing period. The 12 position DIP switches allow for selection of time range and time period.

 

Type	Function	Industries
Timer	Single Shot	General Machinery

Specifications

Timing Mode	Single-Shot Timing - Initiate switch controlled
Operating Voltage	12, 24V DC or 24, 115V AC.
Adjustable Timing Ranges	0.1 - 102.4 seconds, 1 - 1024 seconds, 1 - 1024 minutes, 1 - 1024 hours
Purchase Tolerance	±2%
Repeatability Of Timing Periods	Better than ±2%
Timing Temperature Coefficient	Better than ±0.1% °C
Output Relay	SPDT contacts - 12A at 125V AC UL E88991 & CSA LR90143, 10A 125V AC TUV R9452021.
Terminations	Octal plug-in type.
Dielectric Strength	750V rms between open contact sets, 1,500V rms between contacts and operating voltage terminals.
Transient Protection	Protected by silicon transient suppressors responding to transients within 1x10-12 seconds to a peak pulse power dissipation of 1500 watts.
Operating Temperature /td>	-20°C to 65°C<

Documents and Downloads

Document	File Type	File Size	Download
Model No. 2310SA Datesheet	PDF	314 KB

© 2023 Relay Specialties, Inc.
17 Raritan Road, Oakland, NJ 07436 | 800-526-5376
Created By: G.Dezines