Hydraulic Magnetic circuit breakers provide highly precise, reliable and cost effective solutions to most design challenges. They are considered temperature stable and are thus not appreciably affected by changes in ambient temperature. Their overcurrent sensing mechanism reacts only to changes of current in the circuit being protected. Carling offers a wide array of hydraulic/magnetic circuit breakers from .02 to 700 amps with UL, CSA, VDE, TUV, UL489, UL489A, UL1500 certifications. Included among these offerings are the H-Series breaker and the G-Series DIN rail mount breaker, both of which meet IEC spacing requirements, and the compact CX-Series breaker designed to meet high-amp/high DC voltage applications.
Well known for their proven reliability, Carling Technologies' A-Series hydraulic magnetic circuit breakers are compact, temperature stable and designed for precision operation in OEM markets requiring general purpose as well as full load amp applications. When front panel operation and aesthetics demand a clean, contemporary design, the visi-rocker or paddle actuators are ideally suitable. A sealed toggle actuator style is also available and ideal for harsh environment ...
Carling Technologies' B-Series hydraulic magnetic circuit breakers are specifically designed for applications requiring extra insulation and tongue and groove half-shell constructions. The B-Series carries global regulatory safety approvals for spacing requirements and are ideal for use as general purpose as well as full load amp applications. Available with various choices of time delays, terminals, actuator styles, with a wide range of standard colors and imprinting.
Carling Technologies' C-Series hydraulic magnetic circuit breakers are designed for those applications requiring higher amperage and voltage handling capability in a smaller package. The C-Series UL489 circuit breakers employ a unique arc chute design, which results in obtaining higher interrupting capacities, up to 10,000 amps. Several actuator styles including sealed toggle, handle, rocker, visi-rocker with optional mid-trip handle and exclusive Rockerguard and Push-To-Reset bezel, which help prevent inadvertent actuation, are available.
Carling Technologies' C-Series remote operated, hydraulic magnetic circuit breaker consists of a custom designed remote operated motor module (housed within a circuit breaker molding) coupled to a C-Series hydraulic magnetic circuit breaker. The remote operated circuit breaker (ROCB) offers the convenience of remote ON, OFF, and Reset capability combined with the safety and accuracy of a standard magnetic current sensing device. This allows operation of the circuit breaker...
Carling Technologies' CX-Series circuit breaker features an innovative configuration that allows the breaker to safely handle high amperage and high DC voltage applications in a compact package. This circuit breaker is ideally suited for 380VDC applications, PDUs and photovoltaic energy systems.
Carling Technologies' D-Series hydraulic magnetic circuit breakers are similar to the C-Series circuit breakers, but designed for snap-on-back panel rail mounting on either a 35mm X 7.5mm, or a 35mm x 15mm Symmetrical Din Rail. This design allows rapid and simple mounting and removal of the breaker. It features recessed, wire-ready, touch-proof, shock resistant terminals, suitable for automatic screwdriver assembly, as well as "Dead Front" construction characteristics. Available with ...
Carling Technologies' E-Series hydraulic magnetic circuit breakers are ideally suited for higher current and voltage applications. They offer front and back mounting, screw and stud terminals, and heavy-duty box wire connectors for solid wire or a pressure plate connector for standard wire. A Power Selector device is also available. Certified as a supplementary protector and as a manual motor controller.
Carling Technologies' F-Series hydraulic magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. The F-Series load sensing mechanism is insensitive to changes in ambient or enclosure temperature, providing a consistent trip point over temperatures ranging from -40°C to +85°C. Available with a choice of overload time delays, making them ideal for critical applications requiring inductive loads circuit protection.
Carling Technologies' G-Series hydraulic magnetic circuit breaker insures maximum protection by integrating wiping contacts for longevity; a common trip linkage between poles; a unique terminal bus connection system; and optional integrated auxiliary contacts. It is also suitable for reverse feed and provides finger safe terminals. This DIN rail mount circuit breaker accommodates either a 35mm x 7.5mm, or a 35mm x 15mm symmetrical din rails.
Carling Technologies' H-Series hydraulic magnetic circuit breakers provide maximum and dependable circuit protection in a cost effective, compact solution. By meeting IEC spacing requirements, the H-Series is the ideal choice for international market applications. H-Series breakers feature a “trip-free” mechanism which will open the contacts when a fault condition occurs, even if the handle is held in the ON position.
Designed to provide high levels of circuit protection, the J-Series is a compact, low profile hydraulic magnetic circuit breaker ideally suited for high power density applications. This newest addition to the Carling circuit breaker portfolio is available with a variety of actuator styles and terminal options to suit most any requirement.
The L-Series high performance, compact hydraulic- magnetic circuit breaker is ideally suited for the rigors and confined spaces found in today’s telecom/datacom power distribution units and rack systems. It provides best in class performance in an innovative low profile, space saving package complementing the overall spatial objectives required by telecommunications and data-communications systems designers in their quest to reduce the overall size of equipment, while...
Carling Technologies' M-Series is a miniature, hydraulic magnetic circuit breaker, which features a compact, space saving design, front panel snap-in mounting and a vertically mounted parallel pole configuration. It offers various styling options for design flexibility. Actuator options include rocker, illuminated rocker, paddle and baton style handles, push-to-reset and push-pull pushbuttons, as well as the two-color Visi-Rocker. Available with over 16 different time delays, 5 terminal...
Designed and tested to operate flawlessly in the harshest of environments, Carling Technologies' MS-Series sealed toggle circuit breaker is ideally suited for COTS (commercial off the shelf) military applications. Our space saving envelope meets IP68 requirements and features a durable metal and sealed mounting bushing with MIL-PRF-39019F ingress protection when mounted in a panel.
Carling Technologies' high-performance N-Series hydraulic-magnetic circuit breaker is ideally suited for the rigors and confined spaces of telecom and datacom power distribution units and rack systems. Its innovative, low profile design features easily accessible load and line terminals and sliding barriers for effortless installation.
The R-Series hydraulic-magnetic circuit breaker combines maximum protection with ease of use. With no hardware or front panel cutout requirements, DIN rail mounting is a breeze with an optional rail button and a choice of 45 or 57 mm mounting panels.
The TB-Series is a space-saving, tandem pole circuit breaker specifically designed to fit a two pole breaker into one rack unit making it ideal for datacom and PDU applications.
